01
BeOk RZ-AN230 Actuator
The actuator makes it easy to regulate the ambient temperature, ensuring the level you consider optimal. With it, you maintain and adjust the values you set for the operation of the entire heating system.
BeOk
BeOk Normally Closed Thermal Actuator RZ-AN230-NC
SKU: RZ-AN230-NC
AED 78
In stock
1
- Delivery across all seven emirates. Free on orders over AED 750.
- Order now, we confirm availability and delivery with you before you pay.
BeOk RZ-AN230-NC normally closed thermal actuator for underfloor heating manifolds and thermostatic valves.
Product details
The BeOk RZ-AN230-NC normally closed thermal actuator is designed for installation on the thermal ports of distribution manifolds (underfloor heating or thermostatic valves).
Highlights
02
Comfort with Underfloor Heating
Temperature control goes hand in hand with comfort. To get the most from your underfloor heating, you need the means to set your own temperature range, and the BeOk RZ-AN230 underfloor heating actuator makes this possible.
03
Prevents Floor Overheating
The smart overheating function makes this actuator especially useful, as it helps prevent heating overload, giving you safety and the perfect ambience without any discomfort.
04
Helps Reduce Energy Consumption
With control over your underfloor heating system, you avoid losses on your energy bill. The BeOk RZ-AN230 controls the distribution of the heating medium, so losses are non-existent or very small because the temperature is monitored.
05
Easy Installation
The BeOk RZ-AN230 screws onto the end of the manifold and uses a mechanism that opens it according to the commands received. The manifolds then deliver the required amount of heat, ensuring thermal comfort according to your settings.
- Easy to install: fit the protective ring on the valve before installing the actuator itself
- Thread: M30x1.5 (thread diameter 30 mm)
- Operating status indicator: when working correctly, the top rises by 0.5mm
- Operating status: closed / open, visible on the top of the actuator
- Connects to heating medium distribution circuits (manifolds and valves)
06
Installing the Actuator
Before installing the thermal actuator, remove the protective ring and fit it on the valve, then screw on the actuator's knob by hand (without using an adjustable spanner). Place the actuator body on the valve and press down on it.
07
Checking the Installation
After installing the actuator (when it is switched on), check that the top sits 4.5 ~ 5 mm above the base, no lower and no higher.
